Perfluoroethylene propylene copolymer
Hexafluoropropene-tetrafluoroethylene copolymer
CAS: 25067-11-2
Molecular Formula: C5F10
Perfluoroethylene propylene copolymer - Names and Identifiers
Perfluoroethylene propylene copolymer - Physico-chemical Properties
| Molecular Formula | C5F10 |
| Molar Mass | 250.04 |
| Melting Point | 270 °C |
| Use | Used for the production of electronic insulation parts, wire insulation layer, chemical pump, valve corrosion-resistant lining, textile industry drum anti-adhesive sleeve |
Perfluoroethylene propylene copolymer - Upstream Downstream Industry
| Raw Materials | hexafluoropropylene |
Perfluoroethylene propylene copolymer - Nature
Open Data Verified Data
ethylene chlorotrifluoroethylene copolymer, also known as chlorotrifluoroethylene ethylene copolymer, trade name Halar. It has excellent chemical stability and outstanding radiation resistance, as well as non-flammability, good electrical properties and mechanical properties, no load conditions of long-term use temperature of -80~170 ℃, the maximum short-term use temperature can reach 200 ℃, and the total radiation dose is 5 × l04 Gy. The stability in inorganic chemicals is better than polyvinylidene fluoride, similar to FEP; The stability in organic chemicals is also better than polyvinylidene fluoride, slightly inferior to PTFE and
FEP. Its flame resistance function is better than ETFE (limiting oxygen index of the former is 60, the latter is 30), the mechanical strength is similar to that of polyamide 6, and the wear resistance is slightly inferior to that of polyamide 6, and are better than PTFE, FEP and PFA. Excellent low-temperature resistance, high low-temperature impact strength, cutting resistance
Resistance, oil resistance and weather resistance are also good. It can be processed by the molding method of general thermoplastic plastics.
Last Update：2024-01-02 23:10:35
Perfluoroethylene propylene copolymer - Preparation Method
Open Data Verified Data
ECTFE is an alternating copolymer prepared by copolymerizing ethylene and chlorotrifluoroethylene in an equal amount ratio. The preparation methods include chemical initiated polymerization, irradiation initiated polymerization and ternary copolymerization with addition of a small amount of third monomer.
- chemically initiated polymerization the organic solvent dichlorotetrafluoroethane is added to a stainless steel reaction kettle and cooled to -78 °c, and then the required ratio of high purity chlorotrifluoroethylene and ethylene are added, then add trialkyl boron ether polymerization initiator, under the action of reaction for several hours, can be prepared alternating copolymer of ethylene and chlorotrifluoroethylene, after separation, washing, drying to obtain product.
- irradiation-initiated polymerization the organic solvent trifluorotrichloroethylene is added into a stainless steel reaction kettle, and then the desired ratio of trifluorochloroethylene and ethylene monomer are added, at room temperature, 60 Co irradiation initiated copolymerization (total dose of about 5000Gy) to obtain the powdery copolymer, and then after separation and drying to obtain the product.
- in the process of ternary copolymerization, a small amount of third monomer such as allyl hexafluoroisopropyl ether or perfluoropropyl vinyl ether is added at the same time as adding the desired ratio of chlorotrifluoroethylene and ethylene, with trichloroacetyl peroxide as initiator, at 0~1 ℃ and 0. 67~1. Under the condition of 57MPa, the modified terpolymer can be prepared by reacting th.
Last Update：2022-01-01 11:09:04
Perfluoroethylene propylene copolymer - Use
Open Data Verified Data
can be used as wire insulation layer, cable sheath, communication satellite, nuclear reactor, spacecraft and ultra-low temperature environment in the use of electrical equipment parts, plugs and sockets and other connectors, bobbin, battery box; it can be used as a shrinkable tube for electrical appliances, aircraft coil, military wall thickness less than 0. 2mm products, and chemical pipes, containers, pumps, valves and parts, anti-corrosion lining, coating, gaskets, filter cloth, laboratory ware, hose, etc. Its film, sheet and plate extrusion products can be used as medical packaging, flat cable insulation, thin-walled structure, mechanical gear and sealing materials.
Last Update：2022-01-01 11:09:06
Perfluoroethylene propylene copolymer - Safety
Open Data Verified Data
This product is packed in plastic barrels and corrugated boxes, with product certificate attached, with a net content of lOkg or 25kg per barrel. Transport non-hazardous materials, transport temperature to maintain 10 ℃ or more, to avoid sun, rain. They were stored in a dry, ventilated warehouse at room temperature above 10 °c.
Last Update：2022-01-01 11:09:06
Perfluoroethylene propylene copolymer - Molding Process
Open Data Verified Data
can be processed by molding methods such as extrusion, injection molding, molding and transfer molding.
- The temperature during extrusion molding of the extruded tube was controlled to be 240 ° C. At the rear portion of the cylinder, 250 to 260 ° C. At the front portion, 270 to 300 ° C. At the Mold temperature, and 12 r/min at the screw speed. When the electric wire is coated, it can be extruded at a speed of 15 to 120 m/s.
- injection molding temperature control for the cylinder rear 240~250 ℃, middle 260~270 ℃, front 280~290 ℃, nozzle 280~300 ℃, Mold temperature 100 ℃, the screw speed is 180r/min, the injection pressure is 30 ~ 45MPa, and the molding period is 120s.
- compression molding the temperature of the compression molding is controlled to 225 ° C., the pressure is 7 ~ 14MPa, and the coated ECTFE powder can be applied to the flow dip coating, electrostatic powder coating and rotational molding.
Last Update：2022-01-01 11:09:05
Perfluoroethylene propylene copolymer - Reference Information
| EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
| use | used to make electronic insulation parts, wire insulation layers, chemical pumps, corrosion-resistant linings for valves, anti-adhesive sleeves for light textile industry rollers, etc. |
Last Update：2024-04-09 21:54:55
Supplier List
Spot supply
Product Name: Perfluoroethylene propylene copolymer Visit Supplier Webpage Request for quotationCAS: 25067-11-2
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Spot supply
Product Name: Perfluoroethylene propylene copolymer Visit Supplier Webpage Request for quotationCAS: 25067-11-2
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Multiple Specifications
Product Name: Hexafluoropropene-tetrafluoroethylene copolymer Request for quotationCAS: 25067-11-2
Tel: 0755-29979617
Email: handy@szdankai.com
Mobile: 18657116116
QQ: 928831233
Spot supply
Product Name: Perfluoroethylene propylene copolymer Visit Supplier Webpage Request for quotationCAS: 25067-11-2
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Spot supply
Product Name: Perfluoroethylene propylene copolymer Visit Supplier Webpage Request for quotationCAS: 25067-11-2
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Multiple Specifications
Product Name: Hexafluoropropene-tetrafluoroethylene copolymer Request for quotationCAS: 25067-11-2
Tel: 0755-29979617
Email: handy@szdankai.com
Mobile: 18657116116
QQ: 928831233
View History
Perfluoroethylene propylene copolymer
3-氯苯并[b]噻吩-2-甲酸甲酯
3-(哌啶-4-基)丙酸
2-[[(2-BROMOPHENYL)AMINO]CARBONYL]-BENZOIC ACID
3-(2-甲基嘧啶-4-基)苯甲腈
2''-O-对香豆酰阿福豆苷
(5R,7S)-2,2,3,3,9,9,10,10八甲基-5-(丙-2-炔基)-7-乙烯基-4,8-二氧杂-3,9-二硅杂十一烷
Sodium cholate
COCO MONETHANOLAMIDE
THYMIDINE 5'-TRIPHOSPHATE, [2-14C]-
3-氯苯并[b]噻吩-2-甲酸甲酯
3-(哌啶-4-基)丙酸
2-[[(2-BROMOPHENYL)AMINO]CARBONYL]-BENZOIC ACID
3-(2-甲基嘧啶-4-基)苯甲腈
2''-O-对香豆酰阿福豆苷
(5R,7S)-2,2,3,3,9,9,10,10八甲基-5-(丙-2-炔基)-7-乙烯基-4,8-二氧杂-3,9-二硅杂十一烷
Sodium cholate
COCO MONETHANOLAMIDE
THYMIDINE 5'-TRIPHOSPHATE, [2-14C]-
Raw Materials for Perfluoroethylene propylene copolymer